 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Process Sealed Subminiature Pushbuttons Series AB Distinctive Characteristics Subminiature size (1/3 size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants. .100" x .100" (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Matching indicators available and shown at the end of Section M. Actual Size NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Process Sealed Subminiature Pushbuttons Series AB General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel: 50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 50,000 operations minimum 50,000 operations minimum 2.55N Nonshorting (break-before-make) Pretravel .028" (0.7mm); Overtravel .016" (0.4mm); Total Travel .043" (1.1mm) Materials & Finishes Plunger: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Polyacetal Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Brass with gold plating Brass with gold plating Environmental Data Operating Temp Range: Humidity: Vibration: Shock: -30C through +85C (-22F through +185F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Cap Installation Force: 49.03N (11.2 lbf) maximum downward force on actuator PCB Processing Soldering: Cleaning: Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications UL Recognition or CSA Certification: The AB Series pushbuttons have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Process Sealed Subminiature Pushbuttons TYPICAL SWITCH ORDERING EXAMPLE Series AB H A AB POLES 1 2 SPST SPDT DPDT 2 5 A P PC TERMINALS P B B1 H V V1 (ON) (ON) Straight Straight with Bracket Straight with Inline Bracket (SP only) Right Angle with Bracket Vertical with Bracket Vertical with Inline Bracket (SP only) CIRCUITS 1 5 OFF ON ( ) = Momentary PLUNGERS A *B *C .213" (5.4mm) Long .183" (4.65mm) Long .080" (2.03mm) Long (cannot be used with cap) F H CAPS .201" (5.1mm) Diameter .295" (7.5mm) Diameter * Available in single pole only CAP COLORS A B C Black White Red DESCRIPTION FOR TYPICAL ORDERING EXAMPLE AB25AP-HA .213" (5.4mm) Long White Plunger Black .295" (7.5mm) Diameter Cap DPDT Straight PC Terminals ON-(ON) Circuit NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Process Sealed Subminiature Pushbuttons POLES & CIRCUITS Plunger Position ( ) = Momentary Normal Pole SP SP DP Model AB11 AB15 AB25 OFF ON ON (ON) (ON) (ON) OPEN 2-3 2-3 5-6 3-1 2-1 2-1 5-4 SPST SPDT DPDT Down Connected Terminals Normal Down Note: Series AB Throw & Schematics Terminal numbers are not actually on the switch. INTERNAL CONNECTION 1 3 2 (COM) 1 2 1 (COM) 3 4 3 5 6 PLUNGERS A .213" (5.4mm) Long (2.8) Dia .110 B (5.4) .213 .183" (4.6mm) Long (on SP only) (2.8) Dia .110 (4.6) .183 C .080" (2.03mm) Long (on SP only) (2.8) Dia .110 (2.03) .080 Standard Plunger Color: White Contact factory for red or black options. PC TERMINALS P Straight B Straight with Bracket (10.16) .400 (5.08) .200 (5.08) .200 (0.3) Typ .012 H Right Angle with Bracket (2.54) Typ .100 (2.54) Typ .100 (0.6) Dia Typ .024 V Vertical with Bracket (5.08) .200 (0.6) Dia Typ .024 (0.5) Typ .020 (5.08) Typ .200 (0.8) .031 (2.54) Typ .100 (0.6) Dia Typ .024 (2.54) Typ .100 (0.6) Dia Typ .024 (0.7) Typ .028 (5.08) .200 (0.3) .012 (0.7) .028 (0.5) .020 (8.8) .346 (9.0) .354 (2.54) Typ .100 (5.08) .200 (0.3) .012 (0.7) .028 (9.0) .354 (8.8) .346 (9.0) .354 (8.8) .346 (9.0) .354 (8.8) .346 Use of a support bracket is recommended to increase PCB mounting strength and stability. B1 & V1 terminal dimensions appear on the pushbutton drawings which follow. SLIP-ON CAPS F AT475 .201" (5.1mm) Diameter Cap (5.1) Dia .201 (6.3) (5.4) .248 .213 (2.8) Dia .110 H AT496 .295" (7.5mm) Diameter Cap (7.5) Dia .295 (6.3) (5.4) .248 .213 (2.8) Dia .110 (4.0) .157 Material: Polyamide For use with plungers A & B only. (4.0) .157 Material: Polyamide For use with plungers A & B only. Colors Available: A Black B White C Red 03-07 NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com Process Sealed Subminiature Pushbuttons TYPICAL SWITCH DIMENSIONS Straight PC (5.0) .197 (6.0) .236 Slot (5.84) .230 (0.3) .012 (2.8) Dia .110 (5.4) .213 (6.3) .248 (0.5) .020 (13.1) .516 (2.54) Typ .100 (3.1) .122 (0.4) Typ .016 Series AB Single Pole (4.0) (5.1) Dia .157 .201 (4.5) .177 (0.6) Dia Typ .024 1 COM 2 3 1 (1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031 (9.8) .386 (1.0) .039 (5.08) .200 2 3 C L C L AB15AP-FA AB11 model does not have terminal 2. Straight PC (5.0) .197 (6.0) .236 Slot (9.2) .362 (0.4) .016 (2.8) Dia .110 (0.4) Typ .016 Double Pole (4.0) .157 (3.5) .138 (0.6) Dia Typ .024 1 COM 2 3 4 5 6 4 1 2 3 (5.1) Dia .201 (5.08) .200 (9.8) .386 5 6 (5.4) .213 (6.3) .248 (0.8) .031 (13.1) .516 (2.54) Typ .100 (3.1) .122 (2.54) Typ .100 (0.8) Dia Typ .031 (5.08) .200 AB25AP-FA Straight PC * Bracket (5.0) .197 (6.0) .236 Slot (5.84) .230 (0.3) .012 (2.8) Dia .110 (5.4) .213 (6.3) .248 (5.1) Dia .201 (4.0) .157 (4.5) .177 Single Pole (0.6) Dia Typ .024 (2.54) Typ .100 (10.16) .400 (0.5) .020 (13.1) .516 (0.3) Typ .012 (3.1) .122 (0.7) .028 1 COM 2 3 1 (1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) .100 1 2 3 (1.0) .039 (9.8) .386 (1.0) .039 (2.54) C .100 L 2 3 C L (2.54) Typ .100 (0.8) Dia Typ .031 C L AB15AB-FA B Terminals B1 Terminals Straight PC * Bracket (5.0) .197 (6.0) .236 (0.4) .016 (9.5) .374 (2.8) Dia .110 Double Pole (4.0) .157 (3.5) .138 (5.08) .200 1 COM 2 3 4 5 6 (5.1) Dia .201 (0.6) Dia Typ .024 (2.54) Typ .100 (10.16) .400 (0.3) Typ .012 (3.1) .122 (9.8) .386 (0.7) Typ .028 (5.08) .200 4 5 6 1 2 3 (2.54) Typ .100 Slot (5.4) .213 (6.3) .248 (0.8) .031 (13.1) .516 (0.8) Dia Typ .031 AB25AB-FA Right Angle PC (6.0) .236 (5.0) .197 (0.3) Typ .012 (5.08) .200 (0.3) .012 Single Pole (Single Throw) (5.1) Dia .201 (4.0) .157 Slot (0.8) .031 (3.3) .131 3 1 (6.18) .243 (5.08) .200 1 3 (2.8) Dia .110 (5.08) .200 (0.8) Dia Typ .031 AB11AH-FA (9.8) .386 (5.4) (0.7) .213 .028 (6.3) .248 (10.8) (9.38) .425 .369 (3.1) .122 (5.08) .200 (0.6) Dia Typ .024 (5.08) .200 NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Process Sealed Subminiature Pushbuttons TYPICAL SWITCH DIMENSIONS Right Angle PC (6.0) .236 (5.0) .197 (0.3) Typ .012 (5.08) .200 (2.8) Dia .110 (5.4) (0.7) .213 .028 (6.3) .248 (10.8) (9.38) .425 .369 (0.3) .012 Series AB Single Pole (Double Throw) (5.1) Dia .201 (4.0) .157 Slot (0.8) .031 (3.3) .131 3 COM 21 (6.18) .243 1 2 3 (2.54) Typ .100 (5.08) .200 (9.8) .386 (3.1) .122 (5.08) .200 (0.6) Dia Typ .024 (2.54) Typ .100 (0.8) Dia Typ .031 AB15AH-FA Right Angle PC (6.0) .236 (5.0) .197 (2.8) Dia .110 (0.4) .016 (5.1) Dia .201 Double Pole COM (4.0) .157 Slot (0.8) .031 3 2 5 1 4 1 2 5 (2.54) Typ .100 (2.54) 3 .100 6 (0.3) Typ .012 (5.08) .200 (5.4) .213 (6.3) .248 (9.8) .386 (5.2) .205 (0.7) .028 (5.08) .200 (2.54) .100 (12.92) .509 (3.1) .122 (0.5) .020 6 (10.0) .394 4 (5.08) .200 (0.8) Dia Typ .031 (9.8) .386 (0.6) Typ .024 (2.54) Typ .100 AB25AH-FA Vertical PC * Inline Bracket (5.0) .197 (6.0) .236 Slot (0.3) Typ .012 (1.0) .039 (2.8) Dia .110 (0.4) .016 (5.1) Dia .201 Single Pole (4.0) .157 1 (4.5) .177 (0.7) .028 (1.0) .039 (5.08) (3.9) .200 .153 (5.08) .200 (14.46) .569 3 (9.7) .383 1 2 3 (1.0) .039 (2.54) Typ .100 (5.08) .200 AB11AV1-FA (5.84) .230 (5.4) .213 (6.3) .248 (10.8) .425 (0.6) Dia Typ .024 (1.0) .039 (5.08) .200 C L C .031 L (0.8) Dia Typ AB11 model does not have terminal 2. (5.0) .197 (6.0) .236 (2.8) Dia .110 (4.0) .157 Vertical PC Single Pole (0.4) .016 (5.1) Dia .201 (0.8) .031 1 (5.3) .208 (0.7) Typ .028 (5.4) .213 (6.3) .248 (10.8) .425 (2.54) .100 (2.54) .100 (14.46) .569 (0.5) .020 (3.1) (1.0) .122 .039 (2.54) Typ .100 COM 2 3 (10.2) .402 1 2 3 (1.0) .039 (2.54) Typ .100 Slot (0.3) Typ .012 (2.54) .100 (0.6) Dia Typ .024 (1.0) .039 (5.08) .200 C L C L (0.8) Dia Typ .031 (2.54) .100 AB15AV-FA (5.84) .230 AB11 model does not have terminal 2. Vertical PC (5.0) .197 (6.0) .236 Slot (0.3) Typ .012 (5.08) .200 (2.8) Dia .110 (0.4) .016 (5.1) Dia .201 Double Pole (4.0) .157 (0.8) .031 1 4 5 6 (5.4) .213 (6.3) .248 (9.8) .386 (5.3) .208 (0.7) .028 (5.08) .200 (1.0) (0.5) (3.1) .039 .020 .122 (2.54) Typ .100 COM 2 3 (10.2) .402 4 5 6 1 2 3 (5.08) .200 (2.54) Typ .100 (5.08) .200 AB25AV-FA (9.5) .374 (15.46) .609 (0.6) Dia Typ .024 (5.08) .200 (0.8) Dia Typ .031 NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 |
Price & Availability of AB11AB1-FA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |